The most common material mistakes

In short

1. 01The sink unit is made from moisture-resistant board, or at least its bottom is well closed and protected.
2. 02Every cut-out in a worktop is sealed before the sink and the hob are fitted.
3. 03The fronts for one project are ordered all at once, because a decor from another batch can have a different shade.
4. 04The grain is checked in the cutting list before cutting, not after.
5. 05A long shelf needs a thicker board or a support in the middle. A thin shelf sags under load over time.
6. 06The protective film on gloss fronts stays on until fitting is finished.